RUSTCON-AEROSOL-400ML | Details please find in product description
Stops rust formation
Forms an iron complex that neutralises the rust layer
Ideal for difficult, rust-affected areas
Also protects in cracks and pores due to the high penetration depth
Before spraying, remove loose rust, grease, dirt and coats of paint under which rust has formed. Clean the rust spot thoroughly. Shake the can vigorously, then spray on 2–3 thin layers (spray distance approx. 25–30 cm). Allow approx. 2 hours drying time between the individual layers. Apply a top coat once all the layers have dried completely.
For maintenance and permanent protection of vehicles, systems, machinery and components in all applications.
Hardens at room temperature. After use, turn the can upside down and spray until the valve is empty.
Only 1-C products should be used when applying paint.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
