FILR-FILL-(VAKU-40)-1800G | Details please find in product description
Specific weight reduced by 30%
Quick drying
Ensures fast further processing that will save you time
High filling power and a high degree of stability under load
Heat-resistant up to 80°C
The application surface must be clean, dry and free from grease
Depending on the surface structure, surfaces should be coarsely sanded to achieve optimum adhesion
Due to water sensitivity, polyester material should only be sanded when dry where possible
To prevent complaints, it is important to ensure the correct dosing ratio between the filler and hardener
Dosing: 2% hardener
Working time
4-5 minutes 20°C
Drying time
20-30 minutes at 20°C
Sandpaper
Excellent adhesion to iron, steel, aluminium, galvanised and hot-dip galvanised substrates, GFRP and wood
Suitable for use on all material substrates
Auto/cargo
In vehicle construction and in vehicle repair work for deeply uneven surfaces and scratches as a basis for finishing with fine filler
Metal
As filler in prototype construction and for levelling out blowholes and welding spots
Wood
Ideal for use as repair putty in the construction sector. For universal use on all types of wood. Ideally suited for wood restoration, and in window, door and prototype construction. Not suitable for oily types of wood,
Maximum permissible VOC content of VAKU 40: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 0 g/l
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
