FILR-FINE-(VAKU-20)-1000G | Details please find in product description
Finely matched filler and resin combinations
Quick drying
Saves time as further processing can continue directly (sanding, filling and applying top coat)
Easy to sand
Brilliant white pigmentation
Temperature-resistant up to 80°C
The surface must be clean, dry and free from grease
Sand surfaces
Due to water sensitivity, polyester material should only be sanded when dry where possible
To prevent possible complaints, always ensure the correct dosing ratio of filler to hardener is used
Dosing: 2% hardener
Pot life
4-5 minutes at 20°C
Drying time
20-30 minutes at 20°C
Sandpaper
Automotive/cargo
For eliminating minor paint damage, scratches and for closing pores and uneven areas in filling and universal filling applications.
Metal
Extremely fine surface processing to ensure an optimum finish.
Wood
Suitable as a fine filler or universal filler for all types of wood. Not suitable for oily types of wood. Do not use on heavily weathered surfaces.
Tip: Before the final coating, skim the repaired spot with 1-component or 2-component universal primer, HS filler or Rust Stop Quattro (to eliminate the risk of visible repair edges or gloss reduction)
Maximum permissible VOC content of VAKU 20: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 2 g/l
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
