SRFSEAL-DOS-ORANGE-50G | Details please find in product description
High gap bridging
Completely smooths out surface roughness
100% seal
Gaps are filled completely, so that the resulting bonding provides protection against corrosion from friction and protection against rust.
Instructions:
The surface must be free of oil, grease and other contaminants. Best adhesive results are achieved when the surfaces are cleaned with metal cleaner 7063 (art. no. 0890107063). Observe flash-off time! Manually apply the product across one side of the flange as a continuous bead or by screen printing. The flange should be bolted tightly as soon as possible after joining, so that product does not build up and cause gaps. After assembly, the adhesive hardens to a toughened plastic. The cleaner the surface, the more secure the bonding. The orange sealant cures anaerobically, meaning that it only hardens where the adhesive has no contact with atmospheric oxygen. At the same time, the hardening speed continues to be influenced by the catalytic effect of metal and the gap width. Excessive adhesive that is pressed out of the gap between the two parts does not harden and can be removed with a dry cloth or a cloth saturated with acetone cleaner (art. no. 0893460).
Typical application is in the production of liquid seals on torsion-resistant flange joints, e.g. gear unit and motor housings etc. in the automotive and commercial vehicle industry, metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction etc.
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".