ASMBYADH-SOLVF-CARTRIDGE-310ML | Details please find in product description
The surface must be clean, load-bearing, dry and free from dust and grease. Apply to the surface to be adhered at a spacing of 20–40 cm, with horizontal or vertical serpentine lines. Then firmly press on the joint part. At least one of the two surfaces to be adhered must be absorbent. The bonding takes place after the skin formation, so the adhesive surfaces need to move against each other in order to break the skin. Bonding should be complete no later than 15 minutes after adhesive application. Corrections are still possible at short notice. Depending on the thickness of the bonding until reaching the initial strength (approx. 24 h), heavy components may require additional fixing. Any adhesive tape used can be removed immediately after bonding.
Fresh adhesive can be removed using a damp cloth. Clean tools with water immediately after use. Solidified adhesive requires mechanical removal. Remaining residues can be softened with water and wiped away after a short period of time.
Fixing and mounting aid when installing trim and baseboards, bonding insulation, panels, sound insulation and decorative panels, wall panels, door sills, wood profiles, decorative profiles. Bonding timber constructions and repair of defects in wooden walls. The wide spectrum of surfaces such as wood, Styrofoam, steel, aluminium, PVC, hard foams made from PVC and PU, gypsum plasterboard, mineral fibreboards, masonry, concrete and various plasters. For securing baseboards, panels, insulating and decorative boards, wall cladding, door sills, wood profiles, decorative profiles etc.
The assembly adhesive should not be used in sanitary areas, on marble/natural stone, underground, on bituminous substrates, on untreated (non-primed) metal surfaces or on joints in constant contact with moisture (e.g. concrete surfaces in contact with the ground).
The setting speed is determined by the ambient temperature and quantity of adhesive applied. This is increased with high adhesive quantities and in cold and damp conditions.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
