REPSYS-PLA-ADHESIVESET | Details please find in product description
2C adhesive for the repair and bonding of many types of plastic
Three different processing speeds for different application areas included
No H351 (R40) label required
Coarse sanding dust that cannot be breathed in
Special shorter mixer nozzle
Less material consumption than with conventional mixers
Fast curing
Can be sanded and painted over after a very short period of time
High degree of flexibility of cured adhesive
Absorbs more movement and vibrations at bumper.
Solvent- and silicone-free
The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Discard some adhesive before screwing on the mixer nozzle. The first 2 cm of adhesive from the mixer nozzle should also not be used. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the work instructions.
Repair of spoilers, radiator grills, panel clips, bumpers, brackets on headlights and radiators.
When repairing PP/EPDM (no constructive adhesives), please observe the work instructions.
Please refer to the relevant product datasheets for information on properties and processing instructions for the individual products.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
