PIPSEAL-DOS-PTFE-50G | Details please find in product description
Practical one-handed operation
The surface must be free of oil, grease and other contaminants. Best adhesive results are achieved when the surfaces are cleaned with metal cleaner 7063 (art. no. 0890107063). Observe the flash-off times!
To achieve a completely sealed and pressure-tight connection up to the burst pressure on threaded pipe connections, it is essential that the threads are cut in accordance with the standards, completely coated with adhesive, tightened securely (?5 Nm) and can no longer be twisted! For pocket holes apply several drops internally along the thread up to the base of the bore hole. For through-bores apply several drops onto the screw where the nut will sit. Excessive adhesive that is pressed out of the gap between the two parts will not harden and can be removed with a dry cloth or a cloth saturated with acetone cleaner (art. no. 0893460).
Ideal for use in the automotive and commercial vehicle industry, metal and tool manufacturing, shipbuilding, machine and engine construction, electrical and electronics construction, etc. Seals metallic pipes in accordance with ISO 7.1 (conical/cylindrical threads) to R 3".
For sealing fittings or valves, threaded connections in metal water pipes (as well as service water in heating or cooling circuits, sprinkler systems, etc.).
It can also be used for sealing petrol pipes, diesel pipes or compressed air lines. The product is also suitable for sealing pressure reducers or oil separators in compressed air supplies or for sealing oxygen pipelines < 10 bar (e.g. hospital care).
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
