Loading
0800 554 257 337 (free call) or 089 32000 9100
info@klickparts.com
Sale exclusively to tradespeople
morepic-1
morepic-2
morepic-3
morepic-1
morepic-2
morepic-3
Würth

Würth Klebfix Easy Pen cyanoacrylate structural adhesive

SUPGLU-KLEBFIX-(EASY-PEN)-3 | Details please find in product description

Product number: KP1060427
22,56 €/piece
Delivery time: 3-7 days
klickparts points
+23
From 300€ free shipping (except bulky goods)
Purchase on account possible
Trusted Shops Buyer Protection
Description
Würth - Superglue - For easy and effortless work. Very easy to use one-handed.

Due to legal requirements, this article can be delivered only in following countries:  Germany and Austria

Description:

Easy Pen design


  • Fits ergonomically in the hand

  • Stable and secure

  • Lever for easy and effortless work without too much pressure


Clever special closure


  • One-handed operation

  • Precise dispensing

  • Prevents you from gluing the tip


Bonds in seconds


  • Can immediately be processed further

  • Quick repairs

  • Simple designs are possible without additional fixing


Solvent and silicone-free



Instructions:

The parts to be adhered must be clean, free from grease and dry.


Apply a thin, even layer of adhesive to just one of the surfaces to be adhered. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact.


Use the activator to speed up the reaction of Würth superglues. This can usually be used on all kinds of substrates, but please test it beforehand on a concealed section for compatibility.



Application:

For bonding metal, plastic and rubber parts to each other.



Notice:
  • It is advisable to wear safety gloves and safety goggles.

  • If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.

  • Due to the vapour pressure of the liquid adhesive, slow curing excess product around the adhesive area may result in a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. isopropanol or acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.


1 piece(s)

alternative labels:
Adhesive, Glue, Loctite
Technical specifications
Minimum Order Quantity 1
Abbindezeit min./max. / Bedingung 2-90 s / je nach Werkstoff
Chemical basis Cyanoacrylate acidic ester
Stretch capacity in % (%) 2
Density in g/cm³ (g/cm³) 1.06
Softening point in °C (°C) 165
Colour Transparent
Contents in ml (ml) 30
Weight of content in g (g) 30
Max. gluing gap size in mm (mm) 0.10
Conditions to maintain shelf life from production 15 Monate / trocken, bei Raumtemperatur
Conditions to maintain shelf life from production dry, at room temperature
Solvent-free Ja
Silicone-free Yes
Temperaturbeständigkeit min./max. -30 bis +80 °C
Processing temperature min./max. in °C 5 bis 35 °C
Max. tensile strength in N/mm² (N/mm²) 0.01
Zugfestigkeit min./max. 0,01-0,01 N/mm²
Zugfestigkeit min./max. / Bedingung 0,01-0,01 N/mm² / nach DIN EN 1465, Alu/Alu, 0,2 mm Fuge, 20
Shipping weight (kg) 0.10
Media
pdf, 408kB
Sicherheitsdatenblatt 0893090030
pdf, 434kB
22,56 €/piece
Delivery time: 3-7 days
klickparts points
+23
Share:
Our memberships
Our payment options