Loading
0800 554 257 337 (free call) or 089 32000 9100
info@klickparts.com
Sale exclusively to tradespeople
Würth Adh./sealing comp Super RTV silicone no haz. subst
Würth

Würth Adh./sealing comp Super RTV silicone no haz. subst

SILSEAL-HTEMP-(SUPER-RTV)-R | Details please find in product description

Product number: KP1060813
23,16 €/piece
Delivery time: 3-7 days
klickparts points
+24
From 300€ free shipping (except bulky goods)
Purchase on account possible
Trusted Shops Buyer Protection
Description
Würth - Super RTV silicone adhesive and sealing compound - High-quality adhesive and sealing compound for use in industry and the automotive sector.

Description:

Excellent resistance to chemicals


  • Can also be used in critical areas in which the seal comes into contact with various liquids

  • Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent


Non-acidic hardening system


  • Non-corrosive, therefore has no negative impact on electronic components and on lambda probes


Sealant in compressed-air can


  • Easy to dispense without additional aids

  • The fine beads allow the product to be applied uniformly


Instructions:

Optimum adhesion to dry, clean and dust-free surfaces. The old sealant must be removed in full from the surface.



Notice:

When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).



1 piece(s)

alternative labels:
Silicone sealing compound, high temp., high temp erature silicone, RTV, Gasket, Sealer, Sealant, Sump seal, Loctite, Gasket Seal
Technical specifications
Minimum Order Quantity 1
Range of applications Ölpumpen|Frontdeckel|Nockenwellenlagerdeckel|Ölwannen|Getriebedeckel|Auspuffkrümmer|Auspuffflansche|Deckel und Flansche an Motoren|Einlassbereiche
Bruchdehnung max. / Bedingung 500 % / nach DIN 53504
Chemical basis Neutral crosslinked silicones, oxime-based
Chemical resistance Ja
Density in g/cm³ (g/cm³) 1.25
Relative permittivity 2,8
Conditions for relative permittivity 1 MHz, ASTM D-150
Fully hardening/curing conditions 23°C und 50% relative Luftfeuchtigkeit
Full curing speed in mm/d (mm/d) 3
Dielectric strength in kV/mm (kV/mm) 16
Dielectric strength conditions nach ASTM D-149
Colour Rot
Smell/fragrance Characteristic
Shore A hardness 25
Conditions for skin-formation time bei 23°C und 50% relative Luftfeuchtigkeit
Min. skin-formation time in min (min) 5
Contents in ml (ml) 200
Conditions to maintain shelf life from production pressurised container, no sunlight, not over 50°C
Specific volume resistivity in Ohm/cm (Ohm/cm) 1,000,000,000,000,000
Conditions for specific volume resistivity nach ASTM D-257
Max. short-term temperature resistance in °C (°C) 370
Temperaturbeständigkeit min./max. -60 bis 315 °C
Loss factor 0,002
Loss factor conditions 1 MHz, ASTM D-150
Coefficient of thermal expansion in 1/K (1/K) 0.00
Coefficient of thermal expansion conditions nach ASTM EB-31
Heat conductance λ in J/(m*s*K) (J/(m*s*K)) 0.20
Heat conductance λ conditions nach ASTM D-2214/70
Conditions for tensile strength nach ASTM D-412
Min. tensile strength in N/mm² (N/mm²) 2.20
Shipping weight (kg) 0.40
Media
pdf, 565kB
Sicherheitsdatenblatt 08933312
23,16 €/piece
Delivery time: 3-7 days
klickparts points
+24
Share:
Our memberships
Our payment options