ACRYSEAL-FLEX-STRUCTURE-WHITE-310ML | Details please find in product description
Fine-grain texture
An even grain texture is produced by adding high-quality quartz sand.
Can be painted over
Can be painted over with emulsion paints
Resistant to UV and ageing
Odourless
Adhesion surfaces must be clean, dry and firm. Priming improves adhesion to porous and highly absorbent substrates. Mixing ratio of primer: Textured acrylic with water, ratio of 1:1 to 1:5 (depending on viscosity). Old coatings, mortar and cement residues must be removed. Risk of yellowing on contact with white alkyd resin paints cannot be excluded. Risk of corrosion when used on plain iron and non-ferrous metals.
Please observe the "General Notes on Application for Sealants" and "Construction Material Compatibility of Würth Sealants" overview sheet.
For sealing joints and cracks on indoor and outdoor structured or textured plaster. Typical surfaces: Plaster, concrete, masonry, gypsum, artificial stone, polystyrene etc.
Attention:
Due to the wide variety of paint and lacquer formulas available, we recommend that you always carry out preliminary testing in order to rule out any interactions. Caution: Sealant joints that have been fully painted over tend to crack when movement occurs in the joint, as the applied paint is generally less elastic than the sealant.
Not suitable for bitumen, civil engineering and underwater joining, on silicate substrates or joints that can be walked or driven on.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
