Loading
0800 554 257 337 (free call) or 089 32000 9100
info@klickparts.com
Sale exclusively to tradespeople
morepic-1
morepic-2
morepic-1
morepic-2
Würth

Würth Hot melt adhesive 102

MLTADH-102-DENTLIFTER-500G | Details please find in product description

Product number: KP1059565
34,96 €/piece
Delivery time: 3-7 days
klickparts points
+35
From 300€ free shipping (except bulky goods)
Purchase on account possible
Trusted Shops Buyer Protection
Description
Würth - Hot melt adhesive - High-strength hot melt adhesive for effective dent removal on different materials and surfaces.

Description:
  • Good thermostability

  • Short processing and setting times

  • Waterproof and resistant to UV and ageing


Instructions:

The adhesive surfaces must be free from dust, dirt, moisture, grease and release agents. Softeners in plastics and paints can impair the durability of the adhesive. Apply the hot melt adhesive as a spot, film or bead and immediately press the parts together. Applying brief pressure increases the strength.



Dent removal with dent lifter set:


  • Clean dent with a suitable cleaner

  • Apply hot melt adhesive centrally on a suitable adapter.

  • Affix adapter at deepest point and if necessary cool with compressed air.

  • Hook slide hammer or PinPuller into the adapter and reshape the dent.

  • After removing the dent, use a plastic wedge to slightly lift the hot-melt adhesive at a certain point. Spray adhesive remover spray (art. no. 0893141) into the gap and allow to take effect. The adhesive remover spreads into the gaps and loosens the adhesive residue from the surface.

  • The adhesive residue is removed from the surface in one piece in a matter of seconds.

If necessary, remove any residual adhesive residue with the pre-cleaner (art. no. 08932001).



Application:

High-strength hot melt adhesive that is ideal for the automotive industry for effective dent removal on different materials and surfaces by affixing pulling tabs.



Notice:

Heat occurring during storage (e.g. due to solar radiation) must be avoided due to the changes to the outer shape of the hot melt adhesive this can cause.



1 piece(s)

alternative labels:
adesive, adhesive, glue, glue sticks, hot melt
Technical specifications
Minimum Order Quantity 1
Hardening time in s (s) 30
Number of pieces in Stück [PCS] (Stück [PCS]) 25
Chemical basis Compound of polymer and natural resin
Density in g/cm³ (g/cm³) 0.93
Density conditions bei 20°C
Diameter in mm (mm) 11.50
Softening point in °C (°C) 100
Colour Gelb
Weight of content in g (g) 500
Shelf life from production in Monate [Months] (Monate [Months]) 24
Length in mm (mm) 200
Solvent-free Ja
Max. open time in s (s) 40
Min. open time in s (s) 15
Melting point in °C (°C) 100
Max. melting temperature in °C (°C) 105
Silicone-free Yes
Ultraviolet resistance Good
Max. processing temperature in °C (°C) 220
Min. processing temperature in °C (°C) 180
Viscosity in Pas (Pas) 3.24
Min. tensile strength in N/cm² (N/cm²) 1,372.91
Shipping weight (kg) 0.60
Media
pdf, 385kB
Sicherheitsdatenblatt 0890100057
pdf, 316kB
34,96 €/piece
Delivery time: 3-7 days
klickparts points
+35
Share:
Our memberships
Our payment options