Loading
0800 554 257 337 (free call) or 089 32000 9100
info@klickparts.com
Sale exclusively to tradespeople
Würth Cyanoacrylate structural adhesive, Klebfix
Würth

Würth Cyanoacrylate structural adhesive, Klebfix

SUPGLU-SUPERFAST-50G | Details please find in product description

Product number: KP1060424
33,05 €/piece
Delivery time: 3-7 days
klickparts points
+34
From 300€ free shipping (except bulky goods)
Purchase on account possible
Trusted Shops Buyer Protection
Description
Würth - Superglue - For bonding metal, plastic and rubber parts with and to each other in a matter of seconds.

Due to legal requirements, this article can be delivered only in following countries:  Germany and Austria

Description:

Clever special closure


  • Precise dispensing

  • The tips do not become clogged


Bonds in seconds


  • Immediate further processing possible

  • Fast repairs

  • Simple designs without additional fastening materials possible


High level of resistance to ageing and climatic conditions



Solvent and silicone-free



Instructions:

The parts to be adhered must be clean, free from grease and dry.


Apply a thin, even layer of adhesive to just one of the surfaces to be adhered. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact.


Use the activator to speed up the reaction of Würth superglues. This can usually be used on all kinds of substrates, but please test it beforehand on a concealed section for compatibility.



Application:

Suitable substrates are aluminium, copper, steel/iron, rubber, all common types of elastomer (solid or foam rubber), in particular for SBR, EPDM, GFRP, EPDM, polycarbonate etc. as well as cork, artificial and natural stones, enamels, glass, mirror, porcelain and ceramic.



Notice:
  • It is advisable to wear safety gloves and safety goggles.

  • If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.

  • Due to the vapour pressure of the liquid adhesive, slow curing excess product around the adhesive area may result in a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. isopropanol or acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.


1 piece(s)

alternative labels:
Adhesive, Glue, Loctite
Technical specifications
Minimum Order Quantity 1
Chemical basis Cyanoacrylate acidic ester
Stretch capacity in % (%) 2
Density in g/cm³ (g/cm³) 1.06
Colour Transparent
Contents in ml (ml) 47.10
Weight of content in g (g) 50
Max. gluing gap size in mm (mm) 0.10
Conditions to maintain shelf life from production 15 Monate / bei Raumtemperatur
Conditions to maintain shelf life from production at room temperature
Solvent-free Ja
Silicone-free Yes
Temperaturbeständigkeit min./max. -30 bis 80 °C
Processing temperature min./max. in °C 5 bis 35 °C
Viskosität (Zähigkeit) min./max. 15-120 mPas
Min. combined tension and shear resistance in N/mm² (N/mm²) 8
Shipping weight (kg) 0.10
Media
pdf, 493kB
pdf, 408kB
Sicherheitsdatenblatt 0893090
33,05 €/piece
Delivery time: 3-7 days
klickparts points
+34
Share:
Our memberships
Our payment options