Loading
0800 554 257 337 (free call) or 089 32000 9100
info@klickparts.com
Sale exclusively to tradespeople
morepic-1
morepic-2
morepic-3
morepic-1
morepic-2
morepic-3
Würth

Würth Butyl sealing tape with aluminium lamination

SEALTPE-BUTYL-EX-ALULAMINATION-80| Details please find in product description

Product number: KP1133824
41,28 €/piece
Delivery time: 3-7 days
klickparts points
+42
From 300€ free shipping (except bulky goods)
Purchase on account possible
Trusted Shops Buyer Protection
Description
Würth - Butyl tape with aluminium lamination - Butyl rubber assembly and sealing tape with permanently anchored aluminium lamination

Description:

Good UV, weather and water-resistance


The butyl tape can also be used for outdoor applications and is resistant to rain and all other weather conditions (not suitable for use under water).



Compatible with Plexiglas and Macrolon


The butyl tape can be used for sealing in conservatories and greenhouses without the fear of stress cracks forming (tested by Röhm).



Excellent adhesion to absorbent and non-absorbent surfaces.


Can be used on all surfaces found in the construction field, e.g. steel, aluminium, glass, plastic, wood, concrete, masonry, bitumen etc.



Butyl tapes are self-fusing


The tape is fully functional immediately after application and meets all the required properties.



Vapour diffusion-proof


The butyl tape enables waterproof sealing and prevents the penetration of moisture into the building.



Instructions:
  • The surfaces to be sealed must be dry, capable of bearing load and free from grease and dust.

  • The processing temperature should not be below +10°C.

  • Absorbent and porous surfaces must be pre-treated with Würth butyl/bitumen primer.

  • To obtain good initial adhesion to the surface, the tape should be pressed onto the surface and smoothed using a press-on roller or a similar tool.

  • Butyl has a "cold flow" tendency (flow characteristic of the tape). Therefore, the tape should always be fitted with a press-on profile to prevent the seal from slipping as a result of, for example, the weight of snow or backed-up water. If the tape is fitted or repaired without a press-on profile, there is a risk that the sealing tape may slip.

  • When using a press-on profile, the profile manufacturer's specifications regarding the width of the butyl tape must be observed.

  • Using excessive contact pressure on the profile will cause the sealing compound to be "pushed out". Never compress the butyl tape to the zero point (use the supplied disc as a spacer).

  • When sealing glass retainer profiles, the rubber profile may not lie on the sealing tape. The width of the butyl tape must be selected such that the tape is located between the rubber profiles.


Application:

Sealing of dome lights, window frames, slanted-roof glass structures (with press-on profile only), greenhouses, conservatories and other butt joints made from glass, plastic and metal.


Sealing of roof passages, rain gutter connections and connections between projecting roof and masonry.



1 piece(s)

alternative labels:
Sealing tape, butyl external, tape
Technical specifications
Minimum Order Quantity 1
Design Mit Alukaschierung
Building material class/conditions B2 - Normal entflammbar / nach DIN 4102
Resistance against Wasser|Witterung
Width in mm (mm) 80
Chemical basis Butyl natural rubber
Colour Schwarz
Total thickness in mm (mm) 1,5
Conditions to maintain shelf life from production Unbegrenzt / trockene, liegende und staubfreie Lagerung, 20°
Conditions to maintain shelf life from production dry, lying and dust-free storage area, 20°C and 50
Length in m (m) 20
Thickness of butyl compound in mm (mm) 1,4
Temperaturbeständigkeit min./max. -40 bis 90 °C
Backing material Aluminium composite foil
Backing material thickness in mm (mm) 0,04
Ultraviolet resistance Yes
Processing temperature min./max. in °C 5 bis 30 °C
Shipping weight (kg) 3.90
Media
pdf, 124kB
41,28 €/piece
Delivery time: 3-7 days
klickparts points
+42
Share:
Our memberships
Our payment options