RETCHPUTY-(EPOXI STICK)-ME- | Details please find in product description
Easy to use
Excellent adhesion properties
Simple to process further
High degree of temperature resistance
Temperature resistance up to 120°C, briefly up to 150°C
1. The surface must be clean, free from grease and load-bearing. Roughening the surface beforehand improves adhesiveness
2. Twist off or cut off the required quantity and knead with your fingers until an even colour is achieved
3. Then apply the repair compound within the next 2–3 minutes
4. Dampen your hands with water to improve the modelling process
5. After another approx. 20 minutes, the compound is completely hardened and can be processed further
For filling surface damage to metal, e.g. gear unit housing, aluminium and die-cast parts etc.
Application substrates: Steel (plain and anodised), zinc sheets, cast iron, aluminium, copper, brass, chrome, titanium, lead and stainless steel
Protect from frost and direct sunlight when not applied. Gloves should be worn when applying the repair compound. Due to the different material densities, there are differences in the information regarding the weight of each stick type. For applications subject to high material stresses, the suitability of the repair compound must be checked with preliminary testing.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
