RETCHWAX-SET-HARDWAX-20PCS| Details please find in product description
High strength
Large choice of colours
Colours can be mixed with each other
Inexpensive repair work
Instead of replacement or costly new surface treatment of the whole surface.
Remove crumbly and splintered parts, and clean damaged rims. Where necessary, adjust the base colour for lighter tones in advance. Then apply some hard wax together with the heated tip of the gas melter (art. no. 0890 305 3) to the damaged area. However, the gas melter should not be too hot.
Allow the hard wax to cool down and remove excess areas using the plastic plane (art. no. 0890 305 30). Important: Plane with rounded grooves for edges and soft woods. Pointed grooves for the surface.
Trace the wood grain with touching-up materials and restore the pore pattern. Use the mixing film provided in the retouching paint box (art. no. 0890 305 1) to mix the paints. Finally, spray clear varnish (art. no. 0893 188 2/0893 188 3) on the treated area again (spraying distance 30–40 cm) to protect the area from dust and dirt, and to seal it.
For filling deep cracks and scratches, open joints, holes and dents subject to major stresses. Suitable for front, surface and edge areas, such as on table-top surfaces, kitchen work surfaces, parquet floors, start of a staircase etc.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".