FILR-(GAP-JOINTFILLER)-WHITE-310ML | Details please find in product description
Ready to apply
Quick to apply
Virtually shrink-free
Cracks do not form
Easy to paint
Can be painted over with emulsion paints
Easy to sand
200 ?m grain size fraction max. 1%
The surface must be clean, dry and free from dust and grease.
Using a cartridge or spatula, apply and spread the light filler to the joint, crack or hole. With joints, the protruding joint compound can be cut away with a cutting blade after approx. 15–20 minutes.
The light filler is suitable for filling joints, cracks and holes in walls and ceilings (e.g. gypsum plasterboard, acoustic panels). Small uneven areas in surfaces on walls can also be compensated, such as those that become visible when scraping off wallpaper. Can also be used in model construction.
Please note that these values merely serve as empirical values. It should therefore be noted that the hardening time increases with thicker joints.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".