STNIMPPROT-UBS-GREY-1000ML | Details please find in product description
Excellent adhesion, quick skin formation
Scratch-resistant
Can be painted over
With many commercially available, solvent-based and water-based 1C and 2C top coat paints.
Suitable for oven drying briefly at 40°C to 60°C
Highly sandable once fully dry
Tip for pros
Shake well before use. The surface must be clean, dry and free from rust and dust. Spray a very thin coat for the first coat for improved adhesion and let it flash off for approx. 3 minutes. Then apply the next coat. Allow each intermediate coat to flash off. Operating pressure: 2–4 bar Optimum spraying distance: 30 cm. The best spraying results are achieved at a processing temperature of 15–25°C.
For repairing and restoring the original structure and for protecting against stone chips and corrosion in all visible areas, e.g. front and rear aprons, side members, bumpers and chassis on cars, trucks and buses. Ideally suited for use as anti-humming compound for wheel wells and chassis.
Do not spray on joints, engines, gears and brake systems. After use, turn the can upside down and spray until the valve is empty. Do not dilute, or mix with water or paint. The product can be painted within 24 hours. It can then only be painted once it has been sanded and cleaned.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
