PRIM-SRF-(2K-RAPID)-FILLER-250ML | Details please find in product description
The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake the can vigorously for 2 minutes before spraying. Take the push button (red) out of the cap, place onto the pin on the base of the can and activate by pressing. Remove the push button and dispose of it. Shake the can vigorously again after spraying. Perform 2–3 (70 µm) spray passes at a distance of 20–30 cm. Observe the intermediate flash-off time (10–15 min.). Can be painted over with all commercially available top-coat systems.
Processing time: max. 24 hrs.
Drying times
In conjunction with PE spray filler, it is essential that the drying times are observed. Turn the can upside down and spray until the valve is empty after use.
Your klickparts points will be converted into a voucher. Only the points used will be deducted. If the net value of the goods is less than the voucher, the remaining points will be retained.
Simply click on "Redeem now".
Loading
Loading
